www.prolight.co.uk
Colour Blast 80
User Manual
12
Operating instructions
Static colour:
To access the static colour mode, press the
“MENU”
button until the display shows
CL00
on the LED
display. Use the
“UP”
and
“DOWN”
buttons to select the required static colour from
CL00
~
CL64
.
To adjust the flash speed press the
“ENTER”
button and then use the
“UP”
and
“DOWN”
buttons to
select any value from
F5.00
~
F5.15
. Press the
“ENTER”
button to confirm the setting.
Value: 00 - 15 (00 = no flash, 15 = fast flash speed)
To exit out of any of the above options, press the
“MENU”
button.
Display backlight:
To access the display backlight setting, press the
“MENU”
button until the display shows
don
on the
LED display. Use the
“UP”
and
“DOWN”
buttons to select either
don
(display backlight on) ~
doff
(display backlight off). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
IR remote:
To access the IR remote setting, press the
“MENU”
button until the display shows
Iron
on the LED
display. Use the
“UP”
and
“DOWN”
buttons to select either
Iron
(IR receiver on) ~
Irof
(IR receiver off). Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Display inverse:
To access the display inverse setting, press the
“MENU”
button until the display shows
don
on the
LED display. Press the
“ENTER”
button to display
Stnd
and use the
“UP”
and
“DOWN”
buttons to
select either
Stnd
(display standard) ~
(display inverse).
Press the
“ENTER”
button to confirm the setting.
To exit out of any of the above options, press the
“MENU”
button.
Reset factory settings:
To reset the factory settings, press the
“MENU”
button until the display shows
don
on the LED display.
Press the
“ENTER”
button twice to display
dEFa
. Press the
“UP”
and
“DOWN”
buttons together
and the fixture will be reset to its factory settings.
To exit out of any of the above options, press the
“MENU”
button.
rEv
