background image

3/4

 CONNECT WITH SOLDERING 

Type C Flex Strip comes with protective Silicone cover. It is strongly recommended to 
solder the new wire connection when Grow Strip

 has been cut. 

Please refer to our quick connector instructions sheet. 

-

Soldered Contacts

 LAYOUT OPTIONS

Note: 

Always check the Wattage of your LED Strip or Fixture.

          Power Supply Wattage x 0.8 = Available Wattage

Class 2 Power Supply

Layout 2

40W

18W

Available 80W

18W

Class 2 Power Supply

Layout 3

40W

18W

Available 80W

18W

24VDC (100W)

24VDC (100W)

Class 2 Power Supply

24VDC (100W)

Class 2 Power Supply

Layout 1

38W

38W

50W

60W

Available 80W

Available 80W

24VDC (100W)

Layout with Overload

!

Do Not Use

Securely mount
wires using wire 
clamps

 LED STRIP CUTTING 

Our strips comes with cut mark sign. Strips are be cuttable at each 6 LEDs. Cut 
marks  lying between set of soldering points. 

-

-

-

-

INPUT

120V AC 60Hz

Regulated Class 2 Power Supply

24VDC LED Flexstrip

+

-

Figure shows LED Flexstrip connected 
to a Regulated Class 2 Power Supply

XLD200B-224V-FC

or 

LV100-24N-UNV-J

 POWERING OPTION 

LED GROW STRIP

  

Model: 

FLS103T50FC060G-24

 

1-800-387-4081

 

ledworldlighting.com ledworld.ca

 | 

Copyright © 2016 LED WORLD INC™. All Rights Reserved. We are not responsible for errors or omissions. Product and specications subject to change without notice. Registered trademarks are owned by their respective registers, or licensee(s).

Note

 : If product is cut and re-connection by soldering wire 

is required, it is recommended to connect at the wire solder 
points that are located at every 0.5 meter (19.68”) interval 
of LED Grow Strip™. 

-

-

-

-

Solder Points

LED World Inc. | #130 10615 48 ST SE | CALGARY, AB T2C 2B7 | CANADA | Version 2.3 - 02/08/16

0.5m (19.68”)

Содержание LED GROW STRIP FLS103T50FC060G-24

Страница 1: ... or contact any conductive materials Carefully check that there is no wire cross over or possibility in the future in area of installation Ÿ To reduce the risk of re and overheating make sure all connections are tight Ÿ Product is sold in the maximum length Do not exceed or extend the length of the roll Ÿ Only quali ed electrician or engineer can perform installation familiar with low voltage wiri...

Страница 2: ... AWG 18 AWG 16 AWG 20W 30W 50W 60W 90W 100W 27 FEET 42 FEET 67 FEET 45 FEET 28 FEET 18 FEET 11 FEET 9 FEET 6 FEET 5 FEET 8 FEET 9 FEET 14 FEET 17 FEET 27 FEET 22 FEET 15 FEET 13 FEET WATTAGE CALCULATION The LED Flex Strips have a label on each roll that indicates the voltage and wattage You must have the correct Class 2 voltage Power Supply Transformer for LED Strip model To calculate the wattage ...

Страница 3: ...es with cut mark sign Strips are be cuttable at each 6 LEDs Cut marks lying between set of soldering points INPUT 120V AC 60Hz Regulated Class 2 Power Supply 24VDC LED Flexstrip Figure shows LED Flexstrip connected to a Regulated Class 2 Power Supply XLD200B 224V FC or LV100 24N UNV J POWERING OPTION LED GROW STRIP Model FLS103T50FC060G 24 1 800 387 4081 ledworldlighting com ledworld ca Copyright ...

Страница 4: ... voltage drop Decrease the length of the 24V power feed or use thicker power feed wires between the 24V power supply and the lighting strips MAXIMUM FLEXSTRIP LENGTH SUPPORTED BY OUR CLASS 2 POWER SUPPLY Power Supply Max Feet of LED Flexstrips Power Supply Max Feet of LED Flexstrips LV100 24N UNV J 18 18 Feet Continuous 80 Watts XLD200B 224V FC 2 X 18 Feet Each Channel Total 36 Feet LED GROW STRIP...

Отзывы: