Lectrosonics M2T, Инструкция по эксплуатации

Страница: 19 / 24

Digital IEM Transmitter
Rio Rancho, NM
19
Specifications and Features
RF Power Output:
• Two carriers; two audio channels each
• Power adjustable on each carrier to
10, 25 or 50 mW
Antenna Output: 2 x BNC sockets
Operating Frequencies: 470.100 – 607.975 MHz
Frequency Selection Steps: 25 kHz
Frequency Stability:
± 0.002%
Modulation: 8 PSK
Emission Designator: 200KG7E
Spurious Radiation:
Compliant with ETSI EN 300 422-1
Equivalent input Noise: –128 dBV
Latency: (overall system)
Digital Source: 1.0 ms plus Dante network (on Dante unit)
Analog Source: <1.4 ms
Audio Frequency Response: 20 Hz - 15 kHz
Audio Input:
-10 dBV or +4 dBu settings w/ ±5 dB trim
Audio Input Jack: 4 x combo XLR/TRS connectors
Input impedance: Line: 2k Ohm
Dante Connection:
2 x RJ45, 4 audio RX channels, internally routable
Ethernet Connection: RJ45
USB Connection:
Micro USB on front panel for firmware updates
IRDA: IR transceiver for sync of receivers
Headphone jack 3.5 mm stereo jack
Power Requirements: 9-18 VDC
Power Consumption: 5 Watts
Weight:
2.2 lbs (997.903 grams)
Dimensions: Height: 1.750 in. / 44.45 mm
Width: 8.375 in. / 212.7 mm
Depth: 7.750 in. / 196.8 m.
Specifications subject to change without notice.