Lectrosonics DSP4/4 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 34

Lectrosonics DSP4/4 Скачать руководство пользователя страница 10

10

Update DSP4/4 DSP Software from Disk File

- Allows newer DSP software revisions to be loaded into the DSP4/4.

From time to time, new features or bug fixes will be added to the DSP4/4’s DSP software.  These changes will be
distributed with the LecNet installation disks and available on the Lectrosonics Web site (www.lectrosonics.com).
The DSP software file will have a “.cnv” extension.  When installing from the installation disks, the DSP software files
will automatically be placed in the LecNet directory (default: c:\lecnet). If new DSP software is downloaded from the
Web site, the file should be placed in the LecNet directory. Anytime the DSP4/4 Control Panel is run, it will check for
.cnv DSP software files which are more recent than the DSP software revision in the DSP4/4.  You will be alerted that
the DSP4/4’s DSP software can be updated, and you can select whether or not to let the update proceed. If no DSP
software file is available in the LecNet directory which is newer than the DSP4/4 DSP software, this option will be
disabled.  The shortcut key for this option is Ctrl+T.

Exit

- Ends the application. The shortcut key for this option is Ctrl+X.

«
...
8
9
10
11
12
...
»

Содержание DSP4/4



































Отзывы:

Нет отзывов