manualshive.com logo in svg

Lectrosonics DMTH4, Справочное руководство

Поделиться
Скачать
Lectrosonics DMTH4 Скачать руководство пользователя страница 25

Digital Telephone Hybrid

Rio Rancho, NM

25

Crosspoint Setting 

Controls (cont)

 

Matrix Select
 

Crosspoint Gain 

Color Code

Gain Step (dB) - Sets the step rate for increasing or decreasing the crosspoint gain.  De-

fault is 1dB.  Range can be adjusted from 1dB to 10dB. 
Automix Mode - Selects the automix mode for the crosspoint. Four modes are available: 

Auto - mixes the input applied to the crosspoint into the output channel using the 

Adaptive Proportional Gain automixing algorithm in the normal manner. This is the 

most common setting. 
Direct - Bypasses the automixing algorithm. 
Override - Selected when the input applied to the crosspoint always dominates the 

output channel when it becomes active. 
Background - Selected when it is required that the input applied to the crosspoint 

dominates the output channel 

only when all other inputs are inactive.

Selects either 3x24 main matrix or 3x2 expansion matrix.
Legend which indicate the gain value assigned to the crosspoint.  Colors indicate gain 

value, and if crosspoint is turned off or muted.

Name

Description

Содержание DMTH4







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды