manualshive.com logo in svg

Lectrosonics DMTH4, Справочное руководство

Поделиться
Скачать
Lectrosonics DMTH4 Скачать руководство пользователя страница 18

DMTH4

LECTROSONICS, INC.

18

Inputs Tab

The Inputs Tab is used to setup and control the inputs to 

the DMTH4.  The tab is divided into three functional sec-

tions: TEL, CODEC and AUX.

TEL Input Section

CODEC Input Section

AUX Input Section

TEL

 

 

CODEC and AUX

LEDs, level meters and slider controls for setup and controlling of the telephone input chan-

nels.

Comp/Clip LED - Glows yellow if the input channel compressor has become active, or 

red if the input channel audio is clipping.
Level (dBu) meter - True RMS level meter displaying the input audio level in dBu as 

measured after application of the 

main and rear panel input channel gains, but before 

the signal is processed by the input filters and compressor. Meter range is -40dBu to 

+20dBu.
Gain (dB) control - used to set the input channel gain.  Gain can be set in one of four 

ways:
  Use the mouse to drag the control slider up or down 

Click above or below the gain slider 

Click the up or down arrow next to the Gain Control input box 

Type the value directly into the Gain Control
Mute - mutes input channel when checked.  
Invert - inverts input signal phase when checked.

Same as TEL section.

Gain Control

Gain Control Slider

Name

Description

Содержание DMTH4







































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды