LeCroy Advisor Скачать руководство пользователя страница 74

Страница: 74 / 174

Chapter 7: Searching Traces

USB

Advisor

User Manual

LeCroy Corporation

7.2 Go to Packet/Transaction/Transfer

To display a specific packet:

Step 1

From the menu bar, select the command

Search > Go to Packet/Transaction/Transfer

to display the

Go to Packet

window:

Step 2

Select the desired viewing level (packet, transaction, etc.) from the drop-down
menu next to the words

Go to

Step 3

Enter the number of the packet to display.

Step 4

Click

OK.

The Trace View is repositioned with the selected packet at the top of the screen.

7.3 Go to Marker

To instruct the Analyzer to display a marked packet:

Step 1

Select

Go to Marker

under

Search

on the Menu Bar to display a drop-down

menu listing the marked packets in that Trace View:

Step 2

Select the desired packet from the displayed list.

The Trace View is repositioned with the selected packet at the top of the screen.

Note:

The

Go to Marker

feature functions in conjunction with the

Set Marker

feature. The comments within the parentheses following each marked
packet are added or edited with the

Set Marker

feature. Please refer to

Set

Marker

Reading a Trace

Содержание Advisor















































































































































































Результаты поиска

Содержание Advisor

Отзывы:

LeCroy Advisor, Руководство пользователя, Страница: 74 / 174

Результаты поиска

Содержание Advisor

Отзывы: