Lay the loom on one side;
Assemble the front of the stand with
the loom using 2 machine screws
¼” x 1¼”.
Note: The treadles are fixed to the
back of the stand.
Using the 2 carriage bolts ¼ x 1¾",
the washers and nuts, affix back
posts of the stand to the back lower
cross-member of the loom.
Friction brake;
Friction brake system on this loom have a brake lever, a
loop so tension can be adjust easily, a spring, a brake
circle and a brake drum.
To advance the cloth, lift the lever and turn the front
beam. When sufficiently advanced, lower the lever, then
tighten the warp with the front beam crank. To warp,it is
wise to release the spring to let the beam turn freely.
brake lever
Side Hook
Side Hook
Page 5
