7
Fix an iron fitting A on each of the 4 legs . Make sure they are positioned exactly as shown in the diagram
below.
Put a 3/16” (5mm) steel washer between the iron fitting and the leg. Screw them in using the 3/4” (20mm)
round-headed screw No. 12. Do not over tigten so the iron can move freely.
The screw must be inserted into the smallest hole of the iron fitting.
Screw No. 12, 3/4” (20mm)
Steel Washer 3/16” (5mm)
Left rear leg
Steel Washer 3/16” (5mm)
Screw No. 12, 3/4” (20mm)
Right rear leg
ATTENTION:
Application
of soap to the
screws will
make their
insertion
easier.
