8
Place the loom frame on its right side. Fix the left front A and rear B legs to the left side of the frame with a
5/16” x 2¾” (8mm x 70mm) carriage bolt. With a hammer, hit on the head of the bolt until it is even with the
leg B. Cross the legs so that the lower end of the leg B is towards the back and the lower end of the leg A is
towards the front. Add a steel washer and screw a 5/16” (8mm) lock nut in without overtightening it.
You must feel light resistance when you swivel the legs.
Steel washer 5/16” (8mm)
Nylon Lock nut 5/16” (8mm)
Left Rear
Left Front
Carriage bolt
5/16” x 2¾”
(8mm x 70mm)
