Lec L50263W, Руководство пользователя

Страница: 9 / 20

ensure that the electrical circuit is not overloaded as
this could cause overheating.
Do not twist or bend the cables, and keep
them away from hot surfaces.
Do not plug ın or unplug this appliance with
wet hands.
Following installation make sure that the power
cable is not trapped underneath the appliance.
If the power supply cord is damaged, it must
be replaced by the manufacturer, it’s service agent
or similarly qualified persons in order to avoid a
hazard.
Section 3. Operating the Appliance
3.1. Switching on the Appliance
Allow the appliance to stand for a minimum of 4
hours after installation. Plug in the appliance and
switch on at the mains supply.
Set the thermostat control to the required setting as
detailed in the Temperature Control section (3.2.).
Leave the appliance for approximately 4 hours for the
correct temperature to be reached.