14
Orienting the Transmitter and
Receiver Units
The LF-30S system broadcasts video and audio using the square
directional antennas and your remote control signals using the
whip antennas.
For optimum performance, both the transmitter and receiver
antennas should be carefully oriented towards each other, and the
whip antennas should be positioned vertically.
IMPORTANT: The square antennas are directional antennas – the
textured side of each antenna should face towards each other.
For best performance, the units should be placed as high as
possible to minimize the possibility of interference from people
walking between the transmitter and receiver.
Both the LF- 30S Transmitter and Receiver should be placed on a
flat, stable surface to prevent damage from falling.
For maximum range between the transmitter and receiver units,
try to minimize the number of obstacles between the transmitter
and receiver units, such as your TV, other electronics, large
furniture or appliances.
Note: Although the antennas have been designed to pivot, they
have limited rotation in either clockwise or counter-clockwise
directions. Do not try to force the antennas to move beyond their
range of motion or permanent damage may result. Under no
circumstances should you try to fully rotate the antennas.
Always make sure the receiver and transmitter units are set to the
same channel.
LF-30S
Important:
The textured side of
each antenna should
face each other
