7
www.leantechnik.com
3. Legal provisions
3. Legal provisions
3.1 The following standards, guidelines and regu-
lations have been applied
(also to be observed during installation and operation)
EN ISO 4414
General rules and safety requirements for pneumatic systems and
their components
EN ISO 12100
Safety of machinery - General principles of design -
Risk assessment and risk reduction
EN ISO 13849-1
Safety of machinery - Safety-related parts of control systems
3.2 Liability
The information, notes and technical data given in the documen-
tation were up to date at the time of printing. Claims relating to
brakes that have already been delivered cannot be asserted on
the basis of this. Liability for damages and operational distur-
bances are not accepted in the event of:
•
Failure to observe the installation and operating instructions,
•
Improper use of the brakes,
•
Unauthorised modification of the brakes,
•
Improper work on the brakes,
•
Handling or operating errors.
3.4 Notes
3.3 Warranty
•
The warranty conditions correspond to the conditions
of sale and purchase of Leantechnik AG
(www.leantechnik.com)
•
Defects must be reported to Leantechnik AG
immediately after discovery.
Note on the Machinery Directive (2006/42/EC) The product is a component for installation in ma-
chinery in accordance with Machinery Directive 2006/42/EC. In conjunction with other elements, the
brakes can fulfil safety-related applications. The type and scope of the measures necessary are derived
from the risk analysis of the machine. The brake is then part of the machine and the machine manufacturer
assesses the conformity of the safety device with the directive.
The commissioning of the product is prohibited until it has been ensured that the machine complies with
the requirements of the directive.
Note on the ATEX Directive
The product is not suitable for use in potentially explosive atmospheres without this conformity assessment.
To use this product in potentially explosive atmospheres, classification and labelling according to Directive
2014/34/EU must be carried out.
i
