Lean ROBOTIQ HAND-E, Оригинальное уведомление

Страница: 54 / 90

Robotiq Hand-E Gripper Instruction Manual
Example of response if the grip is completed: 09 03 06 B9 00 00 FF BD 00 1D 7C
Bits Description
09 SlaveID
03 Function Code 03 (Read Holding Registers)
06 Number of data bytes to follow (3 registers x 2 bytes/ register = 6 bytes)
B900
Content of register 07D0 (GRIPPER STATUS= 0xB9, RESERVED = 0x00): gACT = 1 for " Gripper Activation" , gGTO = 1
for " Go to Position Request" and gOBJ = 2 for "Fingers have stopped due to a contact while closing"
00FF
Content of register 07D1 (FAULT STATUS= 0x00, POSITION REQUEST ECHO = 0xFF): the position request echo tells
that the command was well received and that the GRIPPER STATUSis valid.
BD00
Content of register 07D2 (POSITION = 0xBD, FINGER CURRENT = 0x00): the position is 189/ 255 (can be used to validate
the size of the seized object)
1D7C Cyclic Redundancy Check (CRC)
Step 6: Move the robot to the release location
54