Lean ROBOTIQ HAND-E, Оригинальное уведомление, Страница: 51 / 90

Robotiq Hand-E Gripper Instruction Manual
Step 2: Read Gripper status until the activation is completed
Request is: 09 03 07 D0 00 01 85 CF
Bits Description
09 SlaveID
03 Function Code 03 (Read Holding Registers)
07D0 Address of the first requested register
0001 Number of registers requested (1)
85CF Cyclic Redundancy Check (CRC)
Response (if the activation ISNOT completed): 09 03 02 11 00 55 D5
Bits Description
09 SlaveID
03 Function Code 03 (Read Holding Registers)
02 Number of data bytes to follow (1 register x 2 bytes/ register = 2 bytes)
1100
Content of register 07D0 (GRIPPER STATUS= 0x11, RESERVED = 0x00): gACT = 1 for " Gripper Activation", gSTA = 1 for
"Activation in progress"
55D
5
Cyclic Redundancy Check (CRC)
Response (if the activation IScompleted): 09 03 02 31 00 4C 15
Bits Description
09 SlaveID
03 Function Code 03 (Read Holding Registers)
02 Number of data bytes to follow (1 register x 2 bytes/ register = 2 bytes)
3100
Content of register 07D0 (GRIPPER STATUS= 0x31, RESERVED = 0x00): gACT = 1 for " Gripper Activation", gSTA = 3 for
"Activation is completed"
4C15 Cyclic Redundancy Check (CRC)
51