Page 7
Remote Handset
N O T E :
Always use AAA batteries (not supplied) and replace them in sets - never mix old and new batteries.
Very weak batteries can leak and damage the handset. Replace them in good time! There is a risk of fire and burns if a battery is handled improperly. Do not
disassemble, crush, puncture, short the contacts or dispose of the batteries in fire or water.
Do not attempt to open or service a battery. Discard used batteries in full accordance with recycling regulations in force in your area.
NOTE : the handset buttons shown crossed out are for use with other LEAK units such as the LEAK CDT and are therefore not functional when used with the
LEAK STEREO 230.
Press to select the LEAK STEREO 230 remote mode
(press the CD button for the LEAK CDT controls)
10 A
Press to select the source input
5 INPUT
Press to select the direct mode
4 DIRECT
VOL-
Press to decrease volume
9
Press to skip track forward in Bluetooth / PC USB playback mode
8
VOL+
Press to increase the volume
7
MUTE
Press to mute/unmute the sound. In mute mode, the source indicator on
the front panel will flash
1
6
Press to bring the unit in/out of Standby
STANDBY
VOL
3
Press to Play/Pause in Bluetooth / PC USB playback mode
Press and hold for 3 seconds to disconnect Bluetooth
Press to skip track backwards in Bluetooth / PC USB playback mode
2
‘STEREO 230’
INTEGRATED AMPLIFIER
I N S T A L L A T I O N - O P E R A T I O N - M A I N T E N A N C E
