24
The options are:
Password, Hot KEY, Mouse Left, Mouse right, Any KEY,
BUTTON-ONLY,
and
Keyboard 98
.
KB Power ON Password [Enter]
This setting item allows you to set a password for keyboard powering on.
Hot Key Power ON [Ctrl-F1]
This setting item allows you to choose one of the hot keys to power on from F1 to
F12.
Onboard FDC Controller [Enabled]
This setting item allows you to enable or disable the onboard FDC controller.
Onboard Serial Port 1/Port 2
Select an address and corresponding interrupt for the first and second serial
ports.
The choices:
3F8/IRQ4
,
2F8/IRQ3
,
3E8/IRQ4
,
2E8/IRQ3
,
Disabled
, and
Auto
.
UART Mode Select
Select an infrared port mode.
The options are:
Normal
,
IrDA
, and
ASKIR
.
RxD, TxD Active
The options are:
Hi,Hi
,
Hi,Lo
,
Lo,Hi
, and
Lo,Lo.
IR Transmission Delay
The options are:
Enabled
and
Disabled
.
UR2 Duplex Mode
This item selects the IR function when the choice of the UART mode is ASKIR.
The options are:
Full
and
Half
.
Use IR Pins
The options are:
RxD2,TxD2
and
IR-Rx2Tx2
Onboard Parallel Port
This item allows you to determine access onboard parallel port controller with
which I/O address.
The options are:
378/IRQ7
,
278/IRQ5
,
3BC/IRQ7
, and
Disabled
.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer) port. Normal EPP
(Extended Parallel Port) ECP (Extended Capabilities Port) ECP+EPP PC AT
parallel port Bi-directional port Fast, buffered port Fast, buffered, bi-directional
port.
