23
IDE Primary/Secondary Master/Slave UDMA [Auto]
Ultra ATA 66/100 implementation is possible only if your IDE hard drive supports
it and the operating environment includes a DMA driver (Windows 95 OSR2 or a
third-party IDE bus master driver). If your hard drive and your system software
both support Ultra ATA 66/100, select Auto to enable BIOS support.
The options are:
Auto
and
Disabled
.
USB Controller [Enabled]
Selecting Enabled allows the system Universal Serial Bus (USB) controller when
you have USB peripherals.
The options are:
Enabled
and
Disabled
.
USB Keyboard Support [Disabled]
If you use USB keyboard, please choose Enabled.
CNR Audio [Auto]
Selecting Auto allows the BIOS to detect the audio device you use.
The options are:
Auto
and
Disabled
.
CNR Modem [Auto]
The options are:
Auto
and
Disabled
.
OnBoard 6Xsound Chip [Enabled]
Choose to enable or disable the onboard CMI8738 audio device.
The options are:
Enabled
and
Disabled
.
OnBoard Lan Chip [Enabled]
Choose to enable or disable the onboard Realtek 8100B LAN chip.
The options are:
Enabled
and
Disabled
.
Init Display First [AGP]
If you install one AGP and one PCI video card, you can choose which one to be
initialized first as the primary display.
The options are:
AGP
and
PCI Slot
.
IDE HDD Block Mode [Enabled]
Selecting Enabled allows automatic detection of the optimal number of block
read/writes per sector the drive can support.
The options are:
Enabled
and
Disabled
.
Power ON Function [BUTTON ONLY]
This setting item allows you to choose a way to power on.
