Leadtek Amor C101, Руководство пользователя

Страница: 46 / 53

More Security, More Convenience
46
( Figure 9.1 )
NOTE : Each alarm only last for approximately one minute, all these above functions for motion detection
triggered only.
REC Automatically and Save to PC
When you enable motion detect and open the camera monitoring page on the PC. If there is an alarm
triggered, REC will start automatically for several seconds and save to the PC.
New Feature : Start the motion detection compensation and Alarm notification by Http.
3.20 Path Settings

Figure 9.5
Here you can set record path and alarm record path for the camera
.
Figure 9.6
Record Path: Here you can set the manually record path. Click , then start manually record, the record
file will be saved to the specified path here set.
Alarm Record Path : Here you can set the alarm record path. When the motion triggered, and record enable, it
will start alarm record automatically, the record file will be saved to the specified path here set .
Figure 9.7
NOTE
: If you couldn’t set the path here in Windows 7 or Vista, please do it as below:
Windows7 or Vista’s security level is higher than Windows XP/2000, for “
Path Settings
”
1. User could add the Device IP address to the IE’s ‘Trusted sites’ firstly. The step is:
“
IE browser→Tool→Internet Proper→Security→Trusted sites→Sites→Add ”.
2. You can also run the IE as administrator, input the IP address of the camera manually. (Figure 9.8)