Leader LV 5480, Функциональное меню пояснения, Страница: 63 / 246

4. CIE DIAGRAM DISPLAY (SER05)
55
4.2.2 Selecting the Display Standard
To select the display standard, follow the procedure below.
Procedure
VECT → F•2 CIE DIAGRAM → F•2 CIE STD: CIE1931 / CIE1976
Settings
CIE1931: Chromaticity diagram based on CIE 1931 is displayed.
CIE1976: Chromaticity diagram based on CIE 1976 is displayed.
4.2.3 Turning Clipping On and Off
To turn clipping on and off, follow the procedure below.
Procedure
VECT → F•2 CIE DIAGRAM → F•3 CLIP: ON / OFF
Settings
ON: Negative values of the input signal are clipped to zero.
OFF: Negative values of the input signal are displayed according to BT.1361.
4.2.4 Turning the Filter On and Off
To turn the filter on and off, follow the procedure below.
When set to ON, data is averaged every two pixels and displayed.
Procedure
VECT → F•2 CIE DIAGRAM → F•4 FILTER: ON / OFF
4.2.5 Setting the Gamma Value
To set the gamma value, follow the procedure below.
Procedure
VECT → F•2 CIE DIAGRAM → F•5 MANUAL SETUP → F•1 MANUAL SETUP: ON / OFF
Settings
ON: The gamma set with F•5 GAMMA SETUP(1.50 - 2.20 - 3.00) is used. However,
this is not applied to the video-signal-waveform, vector, or picture display.
The gamma calculation expression is (input signal level)^(gamma value).
In addition, negative input signal values are clipped to zero, regardless of
whether F•3 CLIP is set to on or off.
OFF: The colorimetry standard selected in the system settings is used.