Leader LT 6280A, Инструкция по эксплуатации

Страница: 23 / 27

5. REMOTE CONTROL
17
No. 25
Command ERR
Description Get the error information
Data Description Format
00 No error HEX Rsp. parameter 1
01 Fan error HEX
No. 26
Command NET
Description Change the network settings and get them
Notes If you change the setting, restart the LT 6280A.
If you omit the Tx parameters, the network settings will be retrieved.
Data Description Format
0 Fixed IP DEC 1
1 DHCP DEC
2 ***.***.***.*** IP address STR
3 ***.***.***.*** Subnet mask STR
Tx parameter
(can be omitted)
4 ***.***.***.*** Gateway STR
1 0 or 1 Same as Tx parameter 1 DEC
2 ***.***.***.*** Same as Tx parameter 2 STR
3 ***.***.***.*** Same as Tx parameter 3 STR
Rsp. parameter
4 ***.***.***.*** Same as Tx parameter 4 STR
No. 27
Command INT
Description Initialize the network settings
Notes The settings will be initialized as indicated in the Rsp. parameter values.
If the settings before initialization are different, restart the LT 6280A.
Data Description Format
1 0 DHCP DEC
2 192.168.0.2 IP address STR
3 255.255.255.0 Subnet mask STR
Rsp. parameter
4 0.0.0.0 Gateway STR
No. 28
Command MAC
Description Get the MAC address
Data Description Format
Rsp. parameter 1 **:**:**:**:**:** MAC address STR