Leader LT 6280A, Инструкция по эксплуатации

Страница: 22 / 27

5. REMOTE CONTROL
16
No. 21
Command SCE
Description Send the CEC data
Notes Tx parameter 3 can be omitted.
If transmission fails, Rsp. parameters 1 to 3 will not be returned.
Data Description Format
1 00 to FF Transmission header
The higher 4 bits are the LT 6280A address.
The lower 4 bits are the HDMI source device address. HEX
2 00 to FF CEC OP code HEX
Tx parameter
3 Up to 15 bytes CEC parameter HEX
1 00 to FF Same as Tx parameter 1 HEX
2 00 to FF Same as Tx parameter 2 HEX
Rsp. parameter
3 Up to 15 bytes Same as Tx parameter 3 HEX
No. 22
Command RCE
Description Get the received CEC data
Notes If there is no received data, Rsp. parameters 1 to 3 will not be returned.
Data Description Format
1 00 to FF Transmission header
The higher 4 bits are the HDMI source device address.
The lower 4 bits are the LT 6280A address. HEX
2 00 to FF CEC OP code HEX
Rsp. parameter
3 Up to 15 bytes CEC parameter HEX
No. 23
Command NCE
Description Get the number of received CEC data
Data Description Format
Rsp. parameter 1 0 to 16 Number of received CEC data DEC
No. 24
Command LED
Description Set the STATUS LED
Data Description Format
00 (when omitted) STATUS 1: Off STATUS 2: Off HEX
01 STATUS 1: Off STATUS 2: Lit in red HEX
02 STATUS 1: Lit in green STATUS 2: Off HEX
Tx parameter
(can be omitted) 1
03 STATUS 1: Lit in green STATUS 2: Lit in red HEX
Rsp. parameter 1 00 to 03 Same as the Tx parameters HEX