4. HOW TO USE
6
4. HOW
TO
USE
4.1
Connection
As shown below, connect a PC and HDMI source device to the LT 6280A. (The LT 6280A and
PC can be connected in a one-to-one configuration or over a network.)
By controlling the LT 6280A remotely from a PC, you can check the operation of the HDMI
source device. For information on remote control, see the next chapter.
4.2
Turning the Power On
When you turn on the LT 6280A, the STATUS LED changes as shown below. It takes 30
seconds to several minutes for the LT 6280A to start up completely. During this period, the LT
6280A cannot be controlled remotely.
When the LT 6280A is connected to the Ethernet, the STATUS LED can be turned on and off
remotely.
Starting Starting Starting Complete
