Leader Electronics Corp. LT 416, Инструкция по эксплуатации, Страница: 26 / 50

(2) Setting Procedure
•
Use the COUNTRY/CHANNEL key
y
, COUNTRY/CHANNEL display
u
, and
SELECT key
i
for setting RF system.
•
The COUNTRY/CHANNEL key
y
operation is toggled.
The COUNTRY LED lights in country number setting mode; the CHANNEL LED
lights in channel number setting mode.
•
The CHANNEL/COUNTRY display
u
shows the country number (COUNTRY
LED on) or channel number (CHANNEL LED on).
•
The SELECT key
i
is used to select the country number (COUNTRY LED on)
or channel number (CHANNEL LED on).
Pressing Up key increments the number by one; Down key Decrements the
number by one.
•
Refer to Section 4.10.6, "Sound Subcarrier Level Selection" for detail.
Figure 4-4 RF control group
4.10.2 Setting Procedure
(1) About Country Number
A country number is attached to each channel plan. To select the channel plan of
country or region to be set, select the corresponding number.
(2) Country Number Selection
Refer to Step (2) in Section 4.10.1, "RF Output Settings."
(3) Finding Desired Channel Plan
Example to set the channel plan of Germany VHF:
According to the Section 5.2, "Broadcast System/Channel Plan by Country/Region,"
the channel plan "5" will be obtained.
4-6
i
SELECT
y
COUNTRY/CHANNEL
COUNTRY/CHANNEL DISPLAY
u