Leader Electronics Corp. LT 416, Инструкция по эксплуатации, Страница: 20 / 50

3.2 Rear Panel
This section describes the rear panel according to Figure 3-2.
Figure 3-2 Rear Panel
!9
Y, B-Y, R-Y connectors
Output component video signal with fixed level. Luminance signal (Y) and color
difference signal (B-Y, R-Y) are output.
Output impedance of each connector is 75
Ω
.
@0
R, G, B, C.SYNC connectors
Output RGB video signal and composite sync signal with fixed level. Output
impedance of R, G, and B connectors are 75
Ω
. The C.SYNC is output in C-MOS
level.
@1
Inlet
Connect the accessory power cord.
Usable AC voltage range is 90 to 250 V, universal.
@2
Fuse holder
The fuse rating is indicated on the rear panel. When replacing the fuse, rotate the
fuse holder cap counterclockwise using a Phillips screwdriver to remove the cap.
@3
Ground terminal
This terminal is connected to the chassis, and is used for grounding.
@4
Serial number plate
Instrument serial number. Provide this number when contacting us.
3-3
@0 @1 @2
@4 @3
!9