Leader Electronics Corp. LT 416, Инструкция по эксплуатации, Страница: 21 / 50

4. OPERATING PROCEDURE
4.1 Turning Power On
4.1.1 Connecting Power Plug
Check the mains voltage and current capacity for correct before connecting the
instrument.
4.1.2 Turning Power On
Always confirm that the instrument is not in a volatile or flammable environment
before turning the power on.
4.1.3 Warm-Up Time
You should allow the instrument to warm up for at least 30 minutes.
4.2 Connection
4.2.1 Cable
Table 4-1 lists a cable to be used.
Table 4-1
* Do not apply ±1 V (DC or AC peak) or higher external voltage to the output
connectors.
4-1
!0
AUDIO OUTPUT
!1
VIDEO OUTPUT
!2
Y/C OUTPUT
!5
OUTPUT
!8
OUTPUT
!9
Y, B-Y, R-Y
@0
R, G, B, C.SYNC
Sound
Composite video
Y/C difference signal
Composite video
RF
Y
B-Y
R-Y
R
G
B
C.SYNC
RCA
RCA
S connector
BNC
BNC
BNC
BNC
BNC
BNC
BNC
BNC
BNC
Shield wire
75
Ω
coaxial cable
S cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
75
Ω
coaxial cable
Shield wire
Output Connector Signal Connector cable