manualshive.com logo in svg

LEAB LPS II, Руководство пользователя

Поделиться
Скачать
LEAB LPS II Скачать руководство пользователя страница 4

 DANGER

Danger that will lead to severe injury or death

Safety instructions with the signal word 

Danger

 indicate a hazard

which, if not avoided, will result in death or severe injury. Read
the safety instructions carefully and follow them to avoid the
hazard.

You will find useful tips and tricks in certain parts of the manual. These appear
as follows:

TIP

Tips provides additional, useful information.

Read the tip carefully and follow the instructions where
applicable.

2 Safety

This user manual is designed to help you handle the unit safely. Use the unit
solely in accordance with its intended use. Observe the safety instructions:

 WARNING

Risk of injury due to cable fire

Using the unit at too high a voltage can cause a cable fire.

1. Only use the unit within the specified voltage limits.

2.1 Intended use

The LPS II remote display is an optional accessory for displaying operating and
service data of the LPS II.

The remote display can be used to switch the LPS II on or off and to activate
the emergency start function of the LPS II.

4

LEAB Automotive GmbH

Thorshammer 6

24866 Busdorf

2 Safety

LEAB Automotive GmbH

Содержание LPS II





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды