8.3 Quick selection
The outputs for 12 V and 230 V can be selected and switched on directly via
the quick selection.
Quick selection 12 V
Fig. 8:
Quick selec-
tion 12 V
To activate or deactivate the 12 V output, proceed as fol-
lows:
ü
The LPS II remote display is switched on.
ü
The start screen (Status I) is shown on the display of
the unit.
1. Turn the rotary knob to the left.
ð
The quick selection 12 V is shown on the display of
the unit.
2. Switch on the 12 V output by pressing the rotary knob.
ð
The 12 V output is switched on via the quick selection.
Quick selection 230 V
Fig. 9:
Quick selec-
tion 230 V
To activated or deactivate the 230 V output, proceed as
follows:
ü
The LPS II remote display is switched on.
ü
The start screen (Status I) is shown on the display of
the unit.
3. Turn the rotary knob to the right.
ð
The quick selection 230 V is shown on the display
of the unit.
4. Switch on the 230 V output by pressing the rotary
knob.
ð
The 230 V output is switched on via the quick selec-
tion.
NOTE!
If the rotary knob of the LPS II remote display is
not pressed for 5 s, the display automatically switches
back to the start screen (status I).
13
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
LEAB Automotive GmbH
8 Operation
