8.4 Charge status (Status II)
Fig. 10:
Status II
The Status II display gives a detailed overview of the
charge status of the LPS II, including information about
the capacity, remaining runtime and current.
To access the Status II display, proceed as follows:
ü
The LPS II remote display is switched on.
1. Briefly press the rotary knob 1 x.
ð
Status II is shown on the display of the unit.
NOTE!
If the rotary knob of the LPS II remote display is
not pressed for 30 s, the display automatically switches
back to the start screen (status I).
8.5 Operating data (Status III)
Fig. 11:
Status III
The "Status III" menu allows you to view and activate the
operating data of the AC and DC outputs and the char-
ging processes for 12 V and 230 V. Activated outputs and
charging processes are indicated by a green-coloured se-
lection field next to the respective menu item.
To get to the Status III display, carry out the following
step:
ü
The LPS II remote display is switched on.
1. Press the rotary knob 2 x in succession.
ð
Status III is shown on the display of the unit. You can
now select a menu item by turning the rotary knob.
NOTE!
To return to the previous display, turn the rotary
knob to select the “back” menu item and press the rotary
knob to confirm your menu item selection.
8.5.1 12 V output
Fig. 12:
.12 V output
The “.12 V output” menu display allows you to view and
switch on and off the operating data of the DC output.
To switch on the DC output or to view the operating
data, proceed as follows:
ü
The LPS II remote display is switched on.
14
LEAB Automotive GmbH
Thorshammer 6
24866 Busdorf
8 Operation
LEAB Automotive GmbH
