LEAB CHAMP 12 V страница 20 Скачать руководство пользователя

Страница: 20 / 28

9.2 Charging the battery

To unpack the device, proceed as follows:

The device is installed.

The battery is connected.

1. Connect the mains plug to a 230 V mains supply.

Charging starts automatically, the yellow LED of the charge status indic-
ator lights up.

If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.

When the battery is fully charged, the green LED on the charging status
indicator lights up and indicates the trickle charge.

The battery is charged.

9.3 Charging the battery

To unpack the device, proceed as follows:

The device is installed.

The battery is connected.

1. Connect the mains plug to a 115 V mains supply.

Charging starts automatically, the yellow LED of the charge status indic-
ator lights up.

If the charging current is 15% below the maximum value, the yellow and
green LEDs of the charging status indicator light up.

When the battery is fully charged, the green LED on the charging status
indicator lights up and indicates the trickle charge.

The battery is charged.

9.4 Temperature sensor

Depending on the model, the Champ charger has a temperature sensor loc-

ated in the negative lead. The temperature sensor corrects the charging

voltage as a function of the temperature in order to provide an optimal, ef-
fective and gentle battery charge.

LEAB Automotive GmbH

Thorshammer 6

24866 Busdorf

9 Operation

LEAB Automotive GmbH

Содержание CHAMP 12 V





























Результаты поиска

Содержание CHAMP 12 V

Отзывы:

Похожие инструкции для CHAMP 12 V

Бренды по названию

Популярные бренды

LEAB CHAMP 12 V, Руководство пользователя

Результаты поиска

Содержание CHAMP 12 V

Отзывы:

Похожие инструкции для CHAMP 12 V

Бренды по названию

Популярные бренды