3
monoxide fumes can collect
b)
Keep the machine free of oil, dirt and
other impurities.
c)
Please always place the appliance on
even and stable surfaces.
d)
Never operate the appliance inside
buildings or in an environment without
proper ventilation. Pay attention to air
flow and temperature.
e)
Do not operate or store the appliance
in wet or humid surroundings.
f)
Ensure the sound absorber and air
filter work properly. These parts serve
as flame protection in case of misfire.
g)
To avoid possible burn injuries, do not
touch the exhaust system or other
parts that become hot during operation.
Pay attention to the warnings on the
machine.
h)
The engine must not be operated with
excessive rotary speed. The operation
of the engine with excessive rotary
speed raises the risk of injury. Parts
which affect the rotary speed must not
be altered or replaced.
i)
Regularly check for leakage or traces
of abrasion in the fuel system, such as
porous pipes, loose or missing clamps
and damage to the tank or tank cap.
Before use all defects must be repaired.
j)
Work only in daylight or in good
artificial light.
k)
Never pick up or carry a machine while
the engine is running
l)
Stop the engine:
-
whenever you leave the machine
-
before refuelling
m)
Before checking or adjusting the
machine, the ignition plug and the
ignition wire respectively must be
removed to prevent accidental starting.
4). Maintenance and storage
a)
Keep all nuts and screws tight to be
sure the equipment is in safe working
condition.
b)
Never store the equipment with petrol
in the tank inside a building where
fumes can reach an open flame or
spark.
c)
Allow the engine to cool before storing
in any enclosure.
d)
To reduce the fire hazard, keep the
engine, silencer and petrol storage
area free of vegetative material and
excessive grease.
e)
Replace worn or damaged parts for
safety.
f)
If the fuel tank has to be drained, this
should be done outdoors.
g)
Always clean and maintenance before
storage.
h)
Never disassembly the guards for
cutting attachments.
i)
Always store the metal blade in cool
and dry place, never use rusted blade.
It may cause serous injure during
working.
SPECIAL SAFETY WARNINGS FOR
TILLER
1)
While using the machine, always wear
sturdy shoes and long pants. Never
use the machine being barefoot or
wearing open sandals.
2)
Thoroughly inspect the area where the
tiller will be used and remove all
objects that could be launched by the
machine.
3)
Before using the appliance, always
check visually that the tools are not
worn or damaged. Replace teeth and
bolts, worn or damaged lots to
preserve the balance.
4)
The engine shall be stopped when
carrying out maintenance and cleaning
operations, when changing tools and
when being transported by means
other than under its own power.
Содержание LE42196-74DW21
Страница 6: ...5...
