Lea LE42196-74DW21, Оригинальное руководство пользователя

Страница: 16 / 48

15
brush.
6. Check for discoloration on the top of the
spark plug. The standard color should
be a tan color.
7. Check the spark plug gap. The
acceptable gap should be between 0,6-
0,7
8. Install /reinstall the spark plug
carefully by hand.
9. Once the spark plug has been seated,
tighten it with a spark plug wrench.
10. Reinstall the spark plug cap on top of
the spark plug.
11. Reinstall the spark plug cover.
Cleaning
1. Keep your machine clean, the outside
of the machine can be cleaned using a
damp soft cloth with a mild detergent if
required, never use water to clean the
machine as it may cause damage to
internal parts.
2. Some maintenance products and
solvents may damage the plastic parts,
these include products containing
benzene. Trichloroethylene, chloride
and ammonia.
3. Take special care to keep the
ventilation inlets /outlets free from
obstruction. Cleaning with a soft brush
followed by a compressed air jet will
usually be sufficient to ensure
acceptable internal cleanliness.
4. Wear eye protection when carrying out
cleaning.
Adjusting of carburetor
The carburetor governs the engine’s speed
via the throttle control. Air and fuel are mixed
in the carburetor. The air/fuel mixture is
adjustable. Correct adjustment is essential to
get the best performance from the machine.
Adjusting the carburetor means that the
engine is adapted to local operating
conditions, e.g. climate, altitude, petrol and
the type of 2-stroke oil.
The engine has been tested in the factory
with initial adjustment. The user need not
adjust the carburetor.
To ensure that it continues to run at peak
performance and to minimize harmful exhaust
emissions after the running-in period, please
always contact the authorized service to
adjust the carburetor.
Gear
When the tiller be used half a year or need
to heavy repair, the user must give the oil,
and add to the rabbet position