lemaitrefx.com
1
The Stage Fogger DMX is a Microprocessor Controlled, Water Base Fog generating system.
The Microprocessor is responsible for the following control elements -
Monitoring the heat exchanger temperature.
Driving the heater within the heat-exchanger.
Driving the fluid pump unit, relating fluid flow to temperature
Accepting and manipulating data from the Flow Input.
Accepting data from the Smoke Switch.
Ready Status, Heater Status, temperature .
Water Base Fog technology is achieved by pumping a Glycol/Water mixture through a
Heat exchanger. The heat exchanger has been heated to the point where at the fog fluid
mixture will vaporize.
The fluids own vaporization forces the hot mixture out of the output nozzle where,
when it mixes with the ambient air, it forms an opaque aerosol (fog). The fog is made up
of tiny droplets of glycol that form around the small particles in the air. The suspended
droplets reflect the light, which is why fog will take on the colour of the light
illuminating it.
Introduction
Microprocessor Control
Water Base Fog Technology
