background image

Co2 CYLINDER SPECIFICATION CHART

The Carbon Dioxide (Co2) cylinder has an internal pressure rating ranging
from 700 –900 psi.  At room temperature the pressure is about 845 psi.
Certain precautions are therefore advised when handling.  To avoid burst-
ing, do not expose to heat beyond 140 degrees F or store in direct sun-
light.  To avoid possible freezer burn (after activating) do not remove frozen
container for several seconds.  For the best performance results, keep
cylinders at room temperature prior to use.  FACT: Cold weather exposure
greatly reduces internal pressure.  Example: At 32 degrees F pressure is
at 491 psi.  At 2 degrees F pressure is 302 psi.  At minus 20 degrees
pressures is only 200 psi.  So if used, out of doors, on a cold day, keep
them in your chest pocket, at body temperature, until ready for use.

Warranty

All warranty is one year parts and labour unless specified and is on manufac
turer defect only. Overuse or poor maintenance is not accepted. Proof of pur
chase or proof of sale must  always  accompany any warranty returns.  An RA
(return authorization) number must be requested from Le Maitre and noted
 outside of any box returned to our facilities. Any packages without a clearly
marked RA number will not be accepted by our receiving department.  Freight on
 warranty items are freight prepaid to our facility and we will prepay freight back
 to your facility after repair, by the most economical means available. Should you
 require the item express-returned, then you are responsible for any difference in
 freight cost.

Return

Return of any product must be done within 30 days of purchase. The package
must be returned freight prepaid and the RA number clearly marked outsideofthe
box. A restocking charge of up to 25%may be levied. Only credits are issued to
the dealers account.  Any  product not returned within 30 days is considered
purchased.  Le Maitre Special Effects Inc. considers all it's product to be safe for
 use in the application it was intended. Le Maitre Special Effects takes no
 responsibility for misuse or incorrect use. Always refer to equipment owners
 manual for proper use.

Warranty

8

Содержание PRO LAUNCHER











Отзывы: