Le Maitre PRO LAUNCHER, Руководство по эксплуатации

Страница: 5 / 10

Operating Procedure
3
EFFECT : When loaded properly, this 2” canon will safely propel Pro
Streamers and/ or Profetti and dozens of other items to distances of 40 to
60 feet! The end result resembles a cascading display of falling, spinning
confetti and comet tails! It uses no explosives or fire but rather a much
safer propellant, a disposable 8 or 16-gram, Co2 Cylinder. Aside from
loading, the unit comes to you ready to use. However, please review
operation guidelines so you can gain a full understanding of its opeation
and spend less time experimenting.
ASSEMBLY AND OBSERVATION : The electric unit is supplied, already
mounted onto a wooden base by the use of a mounting bolt. Note how
unit angles with adjustment knobs, and cover removes to gain access to
the electrics.
IMPORTANT : The internal return spring
comes factory set with a tension that is
suitable for both upright and upside-
down truss mounting, so no adjustment
should be required.
FIRING PIN : Piercing pin depth is
factory set and machine tapered to a
real sharp point! This should not need
any readjusting. If the firing pin be-
comes chipped replacements are
available.
Co2 CHARGE : The best part of this system is the location of the Co2,
which screws into the center of the female section of the bayonet fitting.
When the barrel is installed, it conceals the Co2 inside. When you remove
the barrel for refilling, screw in a new Co2 cylinder, then replace loaded
barrel.
Tightening Cartridge
Loosening Cartridge