IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
9
PRIORITY
Priority can be activated for a total of up to 2 microphone stations (1 - 5 receivers). Microphone stations which have priority are always active
and are transmitted by the connected audio system (unless their signal level exceeds the threshold), regardless of how many microphone
stations are set as maximum number of open positions (Number of Open Microphones - NOM). This setting can only be carried out on a device
that is configured as a master unit, if two to five units are daisy-chained.
Pressing the pressure rotary encoder PUSH TO ENTER will take you to the selection menu for system settings. Now select the PRIORITY
menu item by rotating the encoder (light background) and press the encoder to access the submenu. Now by rotating the encoder, select
the microphone station whose priority you want to change (light background), press the encoder and select the desired priority setting (ON
= on / OFF = off) by rotating the encoder once again. Confirm the entry by pressing the encoder. To exit the submenu, select the arrow
symbol by rotating the encoder (light background) and confirm by pressing the encoder. To return to the main display, select EXIT now by
rotating the encoder (light background) and confirm by pressing the encoder. After approximately 10 seconds of inactivity, the display will
automatically return to the main screen.
If two to five units are daisy-chained, the microphone stations 1 to 4 (MIC 1 - 4) are those of the master unit, the microphone stations 5 to 8
(MIC 5 - 8) are those of the first slave unit, and so on. To access the microphone stations of the slave units, select the arrow symbol pointing
right by rotating the encoder (light background) and confirm by pressing the encoder.
NOM
(
N
umber of
O
pen
M
icrophones)
Menu item to set the maximum number of simultaneously open microphone stations (1 - 4 microphone stations). This setting applies to all
devices and can only be carried out on a device that is configured as a master unit, if two to five units are daisy-chained (depending on the
system, one microphone station per unit is always open).
Pressing the pressure rotary encoder PUSH TO ENTER will take you to the selection menu for system settings. Now select the NOM menu
item by rotating the encoder (light background) and press the encoder 2x to set the maximum number of simultaneously open microphone
stations as desired from 1 to 4 by rotating the encoder. Confirm the entry by pressing the encoder. If you press the encoder only 1x, you can
exit this menu item without changes by rotating the encoder and selecting the arrow symbol (light background) and confirm by pressing the
encoder. To return to the main display, select EXIT now by rotating the encoder (light background) and confirm by pressing the encoder. After
approximately 10 seconds of inactivity, the display will automatically return to the main screen.
MODE (AUTO / MANUAL / OFF)
Automatic, manually adjustable and switchable gate function. When the signal levels of microphone stations drop below a certain threshold,
these will be muted by this feature if it is enabled. This means that for the transmission of a microphone station, background noise, feedback
and unwanted comb-filter effects from other open channels are effectively suppressed and the speech intelligibility is thus enhanced. When the
levels of input channels rise above a certain threshold, these will be automatically activated. This setting applies to all devices and can only be
carried out on a device that is configured as a master unit, if two to five units are daisy-chained. Setting the threshold value (THRESHOLD) and
the hold time (HOLD TIME) is disabled during the automatic operation. The threshold value is automatically adapted to the volume of ambient
sounds. The manual adjustment of the threshold and holding time for the activation of the microphone station is done in the menu items
THRESHOLD and HOLD TIME.
