- 3 -
1. Assembly
You should assemble the following main parts of the machine:
- Integrated throw mechanism with net - DC 24V adapter (100-240 V net)
- Control box - Extension cord
- Control box holder
Other belongings: Allan keys, throw disc, tube for setting distance, reserve rubber for the net, sticker vel-
cro for fixing the robot
1.
Put the machine on the table with the net closed and with the connectors towards you.
(Fig. 1.)
2.
Connect the cable coming from the throw head to the 15 pole connector found on robot body (the upper
one), then connect the coaxial DC plug of the adapter close near the 15 pole connector, finally connect
one end (the smaller connector)of the extension cord in the 26 pole connector found under the 15 pole
one.
(Fig. 2)
.
Attention:
Connect the cables very carefully, because the pins could get wraped (twisted) very easily.
3.
Turn down the net keeping poles until the first collision, then turn out the hanging poles (used for hang-
ing the machine on the table) in the position seen on the photo, and put the adapter and the extension cord
on the floor.
(Fig. 3.)
4.
Hang the machine on the table as you can see on the photo and turn the head in the table’s direction with
the help of the big screw found on the body.
(Fig. 4.)
Fig 4.
kép
Fig. 4a.
kép
Fig 1.
kép
Fig 2.
kép
Fig 3.
kép
