LCI Wyvern 2000N, Руководство пользователя, Страница: 12 / 16

10 Wyvern
®
2000N Banknote Timer Handbook
Operating Instructions
When a note is entered either “St:xx”, “Pr:xx” or “ti:xx” will be displayed
depending if the used note exceeds the minimum start credit set in option 5. Until
the required minimum is reached “St:xx” will remain displayed. Once the
minimum is reached the load is activated and timing will begin unless a pre-time
has been programmed. If a pre-time has been set then this will count first. If the
UP button is pressed during pre-time any remaining pre-time is cancelled, the load
activated and timing commences. Notes can be inserted while in pre-time or main
time up to any lockout time programmed. When the lockout time is reached
subsequent notes will be rejected. A session can be ended early by pressing the
DOWN button. This will cancel timing, turn off the load and reset the Wyvern ®
2000N for reuse.
Error messages give feedback to the user as shown in table 1. All error messages
will show for 10 seconds on the display before returning to the current task,
however if the cashbox was detected as full or jammed then the display will show
“Err4” for 1 second every 5 seconds no matter what task is occurring until it is
cleared this by viewing option c. While the cashbox is jammed or full the note
reader will be inoperative and about every 5 minutes will try to stack the notes.
When this is achieved, or the cashbox emptied, the note reader will return online
and provided “Err4” has been cleared full operation can be continued.
NOTES.
If the Wyvern
®
2000N displays “Err4” on screen before the minimum start credit
value has been reached the operation must be cancelled by pressing the DOWN
button, clearing the jam or emptying the cash box and resetting “Err4” by entering
interrogation option c.
Error Description
Err0 Note not recognised
Err1 Note acceptor running slow
Err2 Strimming attempted
Err3 CH5 note rejected (fraud channel)
Err4 Stacker full or jammed
Err5 Abort during escrow (incorrect channel for CVPN)
Err6 Note may have been taken to clear jam
Err9 RS232 error - unknown data
Table 1