19
lci1.com
574-537-8900
Rev: 03.09.18
Solera
®
Destination Awning
Installation and Owner’s Manual
(For Aftermarket Application)
CCD-0001255
Fig.39
7�
Tighten the bolt to set the threaded insert fastener with
the
7/16
” wrench while holding the threaded insert tool
stationary
(Fig.41)
.
Fig.40
Fig.41
bolt
threaded
insert tool
threaded
insert tool
7/16
” wrench
6�
Place the bolt through the threaded insert tool and
into the threaded insert fastener. Then place the entire
assembly into the previously drilled hole
(Fig.40)
.
8�
Remove the bolt and threaded insert tool
(Fig.42)
. The
roll tube will now have a threaded hole.
Fig.42
9�
Place the Ground Support assembly bracket over the
threaded hole. Insert the tightening knob into the threaded
hole
(Fig.43)
. Tighten to mount the Ground Support
assembly to the roll tube.
Fig.43
tightening
knob
ground
support
assembly
bracket
Fig.38
ground support assembly bracket
location for
threaded insert
4�
Mark the location for the bolt at the center of the roll
tube using the Ground Support assembly bracket
(Fig.38)
as a guide.
5�
Drill a
3/8
” hole at the mark made on the roll tube
(Fig.39)
.
