Moving head light user manual
- 7 -
Red
000~255
Green
000~255
Blue
000-255
Whit
000-255
Stro
000-255
Dim
000-255
led
000-255
Led
on
off
disp
on
off
Test
Whole Function Test
Fhrs
Operate Time
Ver
Software Version
Rest
Whole Reset
defa
Default
MENU operation
This fixture has 4 keys on front panel for operation, press these to set address, reset, edit and run programs and
so on.
[MENU]: press MENU key to enter edit status, in edit status, if press MENU again, it will return the upper interface. If
no operation 30 seconds after enter edit status, the fixture will exit the edit status automatically.
[Up]: press UP key, the indicator will flash, the address increases one by one, if hold the key continuously, the
address will increase rapidly. If no press within 30 seconds, the indicator stops flashing and exit it. In edit status,
press UP key, it will display the options circularly from down to up.
[Down]
：
press DOWN key, the indicator will flash, the address decreases one by one, if hold the key continuously,
the address will decrease rapidly. If no press within 30 seconds, the indicator stops flashing and exit it. In edit
status, press DOWN key, it will display the options circularly from up to down.
[ENTER]
：
in normal status, no function to press ENTER. In edit mode, press ENTER to enter lower interface.
Function setting
1
）
DMX address setting
1.Press <MENU >to enter EDIT interface
2. Press <UP/DOWN> to choose, then pres <ENTER> to enter
【
Address setting
】
3
．
Press <Up/Down> to choose address 001~XXX
4
．
press <ENTER> to confirm, or press "MENU" to exit
