Moving head light user manual
- 5 -
Ringing
Insert the quick-lock fasteners of the first holder into the respective holes on the bottom of the device.Tighten the
quick-lock fasteners fully clockwise.
Make the finished installed mounting bracket tighten on the fixed bracket.
Pull the safety rope through the holes on the bottom of the base and over the trussing system or other safe fixation
spot.
Note:This step is quite important to ensure that fixture will not drop out by the damage of clamp.
Product specification
●6* 10W Cree RGBW 4in1 LED
；
●LED average lifetime over 50000 hours, low power consumption
●DMX channel
：
14/16CH
●Control mode
：
master/slave, auto, DMX, sound
●Standard beam angle
：
9º
，
standard spot angle
：
18º, (RGBW ) 228lum @5M
●Pan: 630º, TILT: 200º
●360º infinite tilt
● Electrical strobe 1~25Hz
；
●Electrical dimming
：
0%~100%
；
●10 built-in programs for auto display or controlled by DMX controller
●can edit program via DMX controller and front display, and save the programs in CPU of the fixture.
● 3Pin DMX connector, LED display:
● Input voltage
：
AC100 ~240V 50/60Hz
Mounting Bracket
Handing Bracket
Safety Rope
Rapid locking hook
