Moving head light user manual
- 3 -
Safety Instructions
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation,
it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
►If the device has been exposed to temperature changes due to environmental changes, do not switch it on
immediately. The arising condensation could damage the device. Leave the device switched off until it has reached
room temperature.
►Please make sure that the device be earthed.
►Please replace housing if it is broken. This fixture can be using after finished installed.
►The electric connection must carry out by qualified person.
►Make sure that the available voltage is not higher than stated at the end of this manual.
►Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of
the cable must be done by an authorized dealer.
►If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
►Please cut off the power if don't use the fixture or want to clean, maintenance.
Please be aware that damages caused by manual modifications to the device are not subject to warranty. Keep
away from non-professionals.
General Guidelines
►
This device is a lighting effect for professional use on stages, in discotheques, theaters, etc., the device was
designed for indoor use only.
►
This fixture is only allowed to be operated with the max alternating current which stated in the technical
specifications in the last page of this manual.
►
The device can do continuous work for eight hours. Lighting effects are not designed for permanent operation.
Consistent operation breaks may ensure that the device will serve you for a long time without defects.
Warning!
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
