LC6650GP3 V2.3
GP3 SERIES – ATX SWITCHING POWER SUPPLY
.: ENGLISH :.
Thank you for choosing a power supply from LC-Power. The GP3 Series offers precise performance and
versatile connectors for the most currently used hardware. It also features an unusually high efficiency
and a massive cooling capacity.
Please make sure system and power supply are turned off before any installation. Installation under
professional supervision is strongly recommended.
IMPORTANT:
If you face any trouble connecting your devices or feel unsure how to connect them, please refer to your
local dealer to avoid any personal damage or damage on your hardware. Please fasten the power supply
with four screws on the back of the computer case to avoid damage to your components.
Thanks to the po12V rails and the 20+4 pin mainboard connector you can use the power supply
with all currently available mainboards.
If your mainboard only needs a 20 pin connector, just remove the 4 detachable pins of the main
connector. If your mainboard needs an additional 12V connector, use the separate 4 pin square connector
(4 or 4+4 pin). Never use the possibly detached 4 pin plug of the main connector for this purpose!
Enjoy super silent work and a massive cooling capacity thanks to the high-quality
140mm fan.
Including two PCI-Express connectors (6+2 pin) for high performance graphic cards.
Connect SATA and PATA devides like hard disk drives, optical drives or case fans.
The modern technology of the power supply decreases the power consumption in standby mode to less
than 0,5W and increases the efficiency of the power supply >90%. Though the super silent 140mm fan
only works with a low rotational speed, the power supply offers a massive cooling capacity for your
system.
Safety:
The power supply has been CE and TÜV approved as well as 80 PLUS
®
SILVER 230V EU certified and
offers all popular security circuitry like e.g. OCP, OPP, OVP, OTP, SCP, UCP. Additionally the power supply
offers Active PFC (active power factor correction) and has been built according to the current RoHS and
ErP directives.
