10
0 / Space / Swap Marker Axis
This key are used as the number 0 when entering new sweep data, as
‘Space’ when entering new alfa numerical data in the menu system and for
swapping between marker axis when in measurement mode.
1
This key are used as the number 1 when entering new sweep data.
2 / ABC
This key are used as the number 2 when entering new sweep data and as
‘A’, ’B’ or ’C’ when entering new alfa numerical data in the menu system.
3 / DEF
This key are used as the number 3 when entering new sweep data and as
‘D’, ’E’ or ’F’ when entering new alfa numerical data in the menu system.
4 / GHI / L-Valley
This key are used as the number 4 when entering new sweep data and as
‘G’, ’H’ or ’I’ when entering new alfa numerical data in the menu system.
When pressed in measurement mode, the ‘L-Valley’ function will place the
marker at the lowest point of the Left Y-axis.
5 / JKL
This key are used as the number 5 when entering new sweep data and as
‘J’, ’K’ or ’L’ when entering new alfa numerical data in the menu system.
6 / MNO / R-Valley
This key are used as the number 6 when entering new sweep data and as
‘M’, ’N’ or ’O’ when entering new alfa numerical data in the menu system.
When pressed in measurement mode, the ‘R-Valley’ function will place the
marker at the lowest point of the Right Y-axis.
