ZMod Power Motion Upholstery Sofa,
Chair & Modular Assembly Instructions
8
9
ZMod Power Motion Upholstery Sofa,
Chair & Modular Assembly Instructions
F
igure
8
F
igure
9
F
igure
10
NOTICE:
Do not plug in until instructed.
5. Lay the back front side down on the seat (
F
igure
8). Lift the bottom of the outside back
upholstery cover and locate the back and body brackets.
6. Lift the back at a slight angle and align the brackets on the back with the brackets on the
body (
F
igure
9).
7. Lower the back onto the body, taking care not to pinch the cables between any metal or
wood parts and making sure the back and body brackets are completely engaged (
F
igure
10).
8. The back is easier to install when holding it level and lowering it evenly onto the body brackets.
9. Lift the back upholstery cover and look up into the back to visually confirm that both sets of
back and body brackets are engaged (
F
igure
8,9,10). If one or both brackets are not
engaged, or if cables are pinched, remove the back and repeat the steps above.
10. If you are unable to install the back properly, contact your La-Z-Boy
®
dealer for assistance.
– To reduce the risk of injury:
• Do not operate the unit until the back is installed and locked.
• The back of the unit must be lifted for assembly. Please seek assistance if you are
unable to lift at least 45 pounds without strain.
WARNING
(ZMod Power Motion Upholstery Assembly Instructions Continued)
Body
Bracket
Body
Bracket
