43
For HELP, call La-Z-Boy
®
Spas at 1.800.465.2933.
Jets, All Active Comfort Massage
Remove and clean the jets as needed using a high quality plumbing cleanser, water,
and a cloth or soft-bristled brush.
Light, LED Mood and Safety
Drain the spa / hot tub and clean the LED Safety and Mood Light lens as needed using
an optical cloth and an eyewear cleaning product specifically designed not to scratch
optical surfaces.
If the back side of this lens is also dirty remove the rear panel, twist the light assembly
counterclockwise ¼ turn to remove the light from its holder, and clean in this same
manner.
Surface
The surface of your spa / hot tub should be cleaned with a high quality all purpose
cleaner and thoroughly rinsed with warm (not cold) water before refilling. (See page
21.).
WARNING:
Cleaning your spa shell with abrasive cleaners could
discolor, dull, or damage the surface and will void your shell
warranty.
NEVER use paint solvents, acids, acetone, benzene,
lacquer thinner, tolulene, xylene, or similar chemicals to
clean your spa shell.
Water
Depending on usage, the water in your spa / hot tub should be changed every 1-3
months. Upon each change of water it is a good practice to wipe down your spa.
