39
For HELP, call La-Z-Boy
®
Spas at 1.800.465.2933.
Diagnostic Messages
No message on display. Power has
been cut off to the spa.
The control panel will be disabled until
power returns. Spa settings will be
preserved until next power up.
Temperature unknown.
After the pump has been running for 2
minutes, the current water temperature
will be displayed.
“Overheat” - The spa has shut
down.* One of the sensors has
detected 118°F/47.8°C at the heat-
er.
DO NOT ENTER THE WATER. Remove
the spa cover and allow water to cool.
Once the heater has cooled, reset by
pushing any button. If spa does not
reset, shut off the power to the spa and
call your dealer or service organization.
Spa is shut down.* The sensor that
is plugged into the Sensor “A” jack
is not working.
If the problem persists, contact your
dealer or service organization. (May
appear temporarily in an overheat
condition.)
Spa is shut down.* The sensor that
is plugged into the Sensor “B” jack
is not working.
If the problem persists, contact your
dealer or service organization. (May
appear temporarily in an overheat
condition.)
Sensors are out of balance. If
alternating with spa temperature, it
may just be a temporary condition.
If flashing by itself, spa is shut
down.*
If the problem persists, contact your
dealer or service organization.
A significant difference between
temperature sensors has been
detected. This could indicate a flow
problem.
If the water level is normal, make sure all
pumps have been primed. If problem
persists, contact your dealer or service
organization.
Persistent low flow problems.
(Displays on the fifth occurrence of
message within 24 hours.) Heater is
shut down, but other spa functions
continue to run normally.
Follow action required for message.
Heating capability of the spa will not
reset automatically; you may press any
button to reset.
Mess Meaning
Action
Required
