LAZBOY 1HR Series, Руководство по эксплуатации

Страница: 10 / 25

10
Preliminary
Power Supply Specifications:
Input: 100V – 240V 50/60 Hz 1.5A
Output: 29V DC 2.5A
The performance of the built-in battery backup cannot be guaranteed. The backup system is
designed to return a reclined unit to the upright, closed position for exiting ease during a power
interruption. It is not intended to recline the unit. If you require continuing use during a power
outage,
then
you should purchase a separate battery backup system. Contact your La-Z-Boy
®
dealer for more information.
When operating on battery backup the furniture operating speed is reduced. In addition, the
Memory I and Memory II programs and the USB charging port are disabled.
Always maintain constant, even pressure on the button when operating on battery backup to
reduce the energy consumption.
Replace the batteries every six months and after each power failure use.
The battery backup is located in the power supply and uses two 9-volt alkaline batteries (not
included).
1.
Unplug the 120 volt power cord from the electrical outlet, and disconnect the power supply
from the motor connector.
2. The battery compartment is located in the bottom of the power
supply.
Slide the battery
cover over to access the battery compartment.
3. Snap the connection caps on the battery terminals. Place the batteries in the power
supply
.
4.
Slide the battery cover over the batteries.
5.
Proceed to the Operating Instructions .
Battery Backup Assembly Instructions
(2) 9-Volt
Alkaline Batteries Battery
Cover Power
Supply
NOTICE
–
Replace the power supply batteries every six months and after each power
failure use.
The content this page is from P25/P29 OI through step 1.
N19a