LawnMaster LMCG260EH, Инструкция по безопасности и эксплуатации

Страница: 10 / 16

10
5. Continue to wind the line until you have 150mm
of line left on each end. Note: It is helpful to clip and
fasten the line on opposite ends of the spool to keep
the line from unravelling during the next step.
6. Put the spool into housing. Unclip the line from
the spool and place line through the open eyelet on
opposite ends of the housing. Ensure the line has not
tangled.
7. Clip the housing back onto the line trimmer
7. FUEL & OIL MIXTURE
WARNING
Do not fill the fuel tank to the brim and also do not
add fuel to the tank in a closed non-ventilated area.
Fuel used for this model is a mixture of unleaded
gasoline and approved engine lubricant. When mixing
petrol with two-cycle engine oil, use only petrol that
DOES NOT contain ETHANOL or METHANOL (types
of alcohols).
Use 91 unleaded petrol to fuel the unit. This will help
avoid possible damage to the engine fuel lines and
other engine parts.
FUEL
The engine uses two-stroke fuel. If you have
emission requirements, the mixture ratio of the
fuel to oil should be 40:1. If there are no emission
requirements, the mixture ratio can be 25:1.
Other Appropriate Fuel Mixtures
Be careful, a wrong mixture of the fuel will cause
machine failure.
Petrol
Use 91 Unleaded Petrol.
STORING FUEL
The tank to store the fuel should be clean, anti-static,
high-temperature-resistant, fire prevention and safe.
IMPORTANT
Two-stroke fuel may separate. Shake fuel container
thoroughly before every use. Do not mix more fuel
than you expect to use within a month.
Oil - 1 Part
Gasoline - 40 Part
Emissions
Petrol 2-Stroke Oil
1 Litre 25 ml
2 Litre 50 ml
5 Litre 125 ml