LawnMaster L10, Инструкция по эксплуатации

Страница: 32 / 40

32
TROUBLESHOOTING
The robotic
lawnmower vibrates.
Cutting blades are damaged.
Replace the blades. Refer to
Replacing the Mower Blade section
on page 26-27. Blades are available
from www.cleva-europe.com.
Too many blades in the same
position lead to imbalance in the
cutting system.
&KHFNWKDWRQO\RQHEODGHLV¿WWHGDW
each screw.
Different versions (thickness) of
blades are used. Check if the blades are of different
versions (thickness).
The blade screw is loose. Tighten the blade screws.
Grass is being cut
unevenly.
Working area is too big.
Adjust the boundary to decrease the
VL]HRIWKHPRZLQJDUHDRUDGGPRUH
working time.
Blades are dull.
Replace all the blades and screws.
Refer to Replacing the Mower Blade
section on page 26-27. Blades are
available from www.cleva-europe.
com.
Height of cut is too low. Increase the height of cut.
The blade turning disc is wrapped
around by grass or other object.
Check underneath the mower and
clear as necessary (always wear
gardening gloves).
The charging time is
much longer than 45
min.
The charging strips and contact
strip are obstructed by debris.
Use a cloth to clean the contact strip
located on the base station and the
charging strips on the mower.
Charging protector has activated
due to high temperature.
Place the base station in a shady
area or wait until the temperature has
cooled down.
Mower does not
charge.
No power.
Make sure the power cord is
connected properly to the power
adaptor and the power adaptor is
connected to a suitable power supply.
Check the wall socket connection and
whether an earth-fault breaker has
tripped or not.
The charging strips and contact
strip are contaminated.
Use a cloth to clean the contact strip
located on the base station and the
charging strips on the mower.
The battery has a fault. Contact the After Sales Helpline.